It is intended for quick measurement and testing of hardness of structural, carbon-base and stainless steel and nonferrous metal alloys in laboratory-like and field environments.
It is intended for quick measurement and testing of hardness of structural, carbon-base and stainless steel and nonferrous metal alloys in laboratory-like and field environments.
Specifications:
| TDМ-1 | |||
| Hardness scale | Measurements limits | Absolute error | Resolution capability |
| НВ | 90...450 | ±15 | 1,0 |
| HRC | 20...70 | ±2,0 | 0,1 |
| Measurement results correction according to probe space position | + (0º, 45º ,90º, 35º, 180º) |
| Calibration option | + |
| Statistic measurement mode | + (from 3 to 99) |
| Automatic translation of hardness to the ultimate tensile strength (according to GOST 22761) | + |
| Storage battery state-of-charge check mode | + |
| Automatic alarm system which goes off when the measured value exceeds the limits set by the user | sound and visual |
| Measurement results memory | + (2000 measurements) |
| Connection with PC via RS232 port and possibility of measurements report generation | + |
| Time of continuous operation from fully charged storage batteries, no less than, hour | 25 |
| Operating temperatures range, ºС | minus 10….+40 |
| Case protection level according to GOST 14254 | IP40 |
| Electronic unit dimensions, mm | 158 × 85 × 32 |
| Unit weight, no more than, kg | 0,4 |